fbpx

Designed in Waikato, New Zealand. The SL3 promises an exciting new era in water sports.

Manta5 Hydrofoil Bikes are sold exclusively via authorised resellers. Contact your nearest reseller for model prices and demo opportunities.

Hydrofoiler SL3 Tech Specs

Half bike. Half plane.

A radical evolution in cycling

Top Features

Throttle Override
Variable Electric Assist
Up to 4.5 Hours Ride Time
Easy Launch Technology
Modular Design for In-car Transport
Toolless Detachable Battery
Carbon Fibre Foils
IP67 Motor and Housing
Hydrofoiler SL3 top features and icons

Ride duration

The longest ride duration of any electric foiling product on the market.

Graph with the ride duration comparison between the Hydrofoiler SL3 models

Speed

Speeds vary based on ride conditions, rider weight & ability

Coming soon: Speed foil & propeller targeting increases to top end speed

Top-end speed: 20 kph | 12 mph
Cruising speed:
11 kph | 7 mph
Minimum speed: 6 kph | 4 mph

Chop and swell capabilities

Handles rolling swell and choppy conditions. The SL3 ‘slices’ through tougher conditions than conventional SUPs, kayaks and most personal watercraft.

Hire market durability

New hardwearing monocoque chassis, a new robust drivetrain and fully sealed gearboxes are designed with commercial hire operators in mind.

Transport

The Hydrofoiler SL3 features quick connection parts that breaks the bike into 5 sub-assemblies. Transport in car and carry to the water by hand.

Maintenance

Ultra low maintenance, no high wear drive components like on most bicycles.

Simple hose wash down after salt water riding. 

Access for servicing/replacing modules requires less tools. Further modularity built in to sub-assemblies for affordable repair – when a fault occurs the replacement is of the affected module, not the whole assembly​.

Battery charge time

Hydropack 1000 Battery: 3 hours
Hydropack 600 Battery: 2 hours

Assembled dimensions

1.4 m High x 2 m Wide x 2.2 m Long  |  4.5 ft High, 6.5 ft Wide, 7.2 ft Long

Parts weight

Chassis: 10.1 kg | 22 lbs
Drive Train: 13.9 kg | 30 lbs
FC2 Rear foil: 5.8 kg | 12.5 lbs
HE2 Carbon rear foil: 2.9 kg | 6 lbs
Hydropack 1000 Battery: 8.6 kg | 19 lbs
Hydropack 600 Battery: 7.1 kg | 15.5 lbs
Tiller and front foil: 1.9 kg | 4 lbs

Added modularity to the SL3 has reduced the overall carry weight with the heaviest module being 13.9kg (30pounds)

Mechanical

Rear Foil: HE2 Carbon
clearcut 3d render top view of a Hydrofoiler SL3's HE2 carbon fiber rear foil with transparent background

Super lightweight and high strength.

Connection: Custom Tapered Shoe
Aspect ratio: High (10)
Wingspan: 6’6” (2 m)

Front Foil: HE2 Carbon
clearcut 3d render top view of a Hydrofoiler SL3’s HE2 front foil with transparent background

Super lightweight and high strength.

Wingspan: 3’11” (1.2 m)

Rear Foil: FC2 Fixed Chord
clearcut 3d render top view of a Hydrofoiler SL3’s FC2 standard rear foil with transparent background

Built for learners. Durable, low-cost entry option
for new riders and hire operators.

Connection: Custom Tapered Shoe
Aspect ratio: High (10)
Wingspan: 6’6” (2 m)

COMING SOON

SPEED FOIL RANGE

Chassis

  • Composite frame with integrated buoyancy
  • Toolless Detachable Drive unit for easy transport and storage

Drivetrain

  • Sealed drive unit: 3 purpose-built Manta5 Gearboxes IPX8 rated
  • Gearbox: Custom planetary 
  • Driveshaft: aluminium
  • Propeller shaft: stainless steel
  • Propeller: carbon fibre reinforced nylon

Electronic

E-System

  • Motor: Custom in-line motor, sealed to IP67
  • Gearbox: Custom planetary gearbox with torque, speed and temperature control, with the ability to assist pedal power or operate individually 
  • Power: 2500 watts
  • Control: Wired Manta5 Remote

Hydropack Batteries

  • Chemistry: Lithium-ion
  • Voltage: 52V (Nominal)
  • Hydropack 1000: 1000 Wh
  • Hydropack 600: 600 Wh
  • Peak Discharge: 3000W
  • Housing: Dual layer marine grade housing. Clear outer layer for easy inspection. IP67 rated. Integrated Battery Management System with constant ‘pulse’ monitoring system.
  • Charger: 52V 110/240V AC input

Display/Throttle Unit

  • Firmware updates via Bluetooth
  • Integrated LCD display: Live Battery Level, Assist Level, Throttle position, System Warnings, Rider Power Display, Rider Cadence Display
  • Increase/decrease electrical pedal assist (10 Assist power levels)
  • Torque and cadence-controlled motor power
  • Throttle Override
  • Different Ride modes: Pedal Assist with optional throttle override (Default), Boost (Full throttle, Max Speed)

Please note, variability in the manufacturing process and suppliers may result in minor spec changes.

Hydrofoiler SL3 water-bike standing on a jetty by a green lake and a close-upo of the same photo on the right

Order your SL3

Contact an authorised reseller for prices and demo opportunities